![background image](http://html1.mh-extra.com/html/ganterud/l3/l3_user-manual_3404422017.webp)
Copyright © Ganterud Lifting Solutions AB | www.ganterud.se | [email protected]
17
4.5 Synchronising new remote control with lifting yoke
If the old remote control has to be replaced, or if you want to have two remote controls
for one lifting yoke.
Deleting:
1. Make sure that the lifting yoke is switched off using the power switch, and that the
new remote control is switched off.
2. Turn on the new remote control
3. Turn on the power switch on the lifting yoke
4. Press
button “1” and button “A”
on the remote control at the same time for approx.
5 seconds. The old remote control has now been deleted in the lifting yoke.
Press the various buttons to check that it is not working. Note: take care and monitor
both lifting yokes to make sure that no risk of injury can arise.
Synchronising:
1. Turn off the lifting yoke with the power switch, and turn off the new remote control.
2. Turn on the new remote control
3. Turn on the power switch on the lifting yoke
4. Press both arrow keys (
button “1” and button “2”
) on the new remote control for
approx. 5 seconds. The new remote control is now synchronised with the lifting yoke.
Test all the functions on the lifting yoke. Note: take care and monitor both lifting yokes
to make sure that no risk of injury can arise.
1 + A
1 + 2