G&F Manufacturing R-410A, Service Manual

Page: 3 / 17

WARNING:
Only certified service providers to work on unit. Anyone else will void warranty.
Only put your refrigerant gauges on these units as a last resort.
It is a package unit that has had many steps taken at the factory to assure the system is
contaminant free. Almost all problems can be diagnosed without the use of gauges.
WARNING:
Turn off all electrical power to unit before servicing
Check to see that the unit is bonded and that the electric conduit is connected to the electrical
box inside the unit.
ATTENTION
:
If you find that it is mis-plumbed, un-bonded, etc. contact the warranty department and let
them handle it.
Do not bad mouth an installation!
Attention, Warning, and Caution boxes have been place through out this
manual to help point out important information to look out for.
Attention
- Points out important information to be aware of
Warning
- Indicates an action that might void warranty
Caution
- Alerts service or user regarding safety issues.
Page 3
Introduction
This manual was put together to introduce you to G&F Manufacturing’s
new R-410A Swimming Pool Heat Pump. Please read the manual before
you begin to service unit. If you have any questions, we have a
dedicated service department to help you.