Installation
ATTENTION
:
Before installing this heater there are several things to consider for performance,
serviceability and warranty.
Direction of Placement:
Access panel should always face out away from wall. If you must face the service panel
toward the wall, leave a minimum of 24” between the wall and the unit.
ATTENTION
:
You will not have a happy customer if they have to squeeze between the wall and the heater
to use the controller.
Placement:
Airflow is critical to the performance and efficiency of a heater, therefore leave as much
space around and above heater as possible. Installations under palm trees, inside screened
porches etc. may help hide unit but will drastically reduce the performance of the unit. You
will not have a happy customer. The unions were to the side of the unit to keep pipes out of
the way of the control panel so that they are not stepped on while adjusting controls or
WARNING:
Do not plumb the pipes back around front where pipes will be stepped on,
or prohibit access to the front panel.
Make sure unit is bonded and conduit is connected all the way up to the control box.
ATTENTION
:
For a more detailed installation manual, please visit our website
Gulfstreamheatpump.com
,
and the manual will be there for you to download. If no internet access, call service
department
954-318-6900
and we will fax or mail a copy to you.
Page 13
Summary of Contents for R-410A
Page 14: ...Page 14...
