Operation
G&D VisionXS-IP-C-DP-UHR ·
14
English
Operation
You can operate the computer connected to the
VisionXS-IP-CPU
computer module at
the remote console of the user module.
IP-MUX functionality
The modules of the
VisionXS-IP
series offer with the
IP-MUX
functionality the possibil-
ity to access different computer modules (one after the other).
To use this function, you can connect a maximum of 20 computers to separate com-
puter modules and configure these computer modules as remote targets (see
page 21 ff.) in the user module.
The configured
remote targets
can be connected via the local OSD of the user module.
How to access a remote target via on-screen display:
1. Start the local on-screen display with the
Alt+Num
hotkey (default).
2. Use the
arrow keys
to select the remote target to be accessed.
3. Press
Enter
.
How to disconnect a remote target:
1. Start the local on-screen display with the
Alt+Num
hotkey (default).
2. Press the
Ctrl+D
key combination to disconnect the active connection to the
remote target.
NOTE:
The connection between the computer module and the user module is
established automatically after the modules are started.
IMPORTANT:
A user module can only be connected to one computer module at a
time!
Select
IPCON
Sort. Alph+
Search .......................
Remote target #1
Remote target #2
Remote target #3
ESC
F11:Config
Summary of Contents for VisionXS-IP-C-DP-UHR
