G&D VisionXS-IP-C-DP-UHR, Assembly, Installation And Operation

Page: 83 / 144

Installation
G&D VisionXS-IP-C-DP-UHR · 8
English
Connecting audio and RS232 interfaces (depending on model)
Line In:
Use an
Audio-M/M-2
audio connection cable to connect the omputer’s
Line-
Out
interface to this interface
Serial: Use the RS232-M/F-2 cable to connect one of the computer’s 9-pin serial inter-
faces to this interface.
Establishing a connection to the Gigabit Ethernet
Transmission 1:
Plug a category 6 (or better) twisted pair cable, which is available as
accessory, into this interface. Connect the other end of the Gigabit Ethernet.
NOTE: By default, the KVM switch transfers audio data between switches.
In addition, you can enable the transmission of RS232 data and, alternatively,
disable the transmission of audio data (see
(De)Activating signals
on page 24).
NOTE: The activation of the Transm. Redundancy feature activates the Transmission 2
interface.
Use this interface to establish a redundant
transmission connection ( link aggregation )
with the Gigabit network.
Line In Serial USB CPU DP CPU USB CPU DP CPU
Transmission 1 Service Pwr Main Power Transmission 2 Red. Power Network Service Pwr Main Power Transmission 2 Red. Power Network