Installation
G&D VisionXS-F-DP-HR ·
15
English
Establishing a connection to the computer module
Transmission 1|Tx:
Insert the LC plug of a fibre optic cable connected to the
Transmis-
sion|Rx
interface of the computer module or to one of the
Dynamic Ports
of a compa-
tible matrix (see page 5).
Transmission 1|Rx:
Insert the LC plug of a fibre optic cable connected to the
Transmis-
sion|Tx
interface of the computer module or to one of the
Dynamic Ports
of a compa-
tible matrix (see page 5).
IMPORTANT:
The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the
Transmission
interfaces and the cable
plugs.
NOTE:
The activation of the
Transm. Redundancy
feature activates the
Transmission 2
interface.
To use the
Transmission 2
interface, you need an additional SFP transceiver.
Choose the right
SFP transceiver
for your variant of the
VisionXS-F-DP-HR
series. The
Transm. Redundancy options
contain both, a corresponding
SFP transceiver
and the
Transm. Redundancy
feature.
Use the
Transmission 2
interface to establish a connection with a second counter-
part.
Transmission 1
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Service
Pwr Main Power
Transmission 2
Red. Power
Network
Summary of Contents for VisionXS-F-DP-HR
