Configuration
68
· G&D VisionXS-F-DP-HR
Active console after starting an extender
When selecting the
Image display
option
keep off
/
Permanently off
(see page 66 f.) both
modules do not show an image after restarting the extender. Only after an input is
made at one console, its image is displayed on the monitor.
The setting
Active console after start
allows you to define a module whose image dis-
play you want to activate immediately after starting the extender.
How to select whether and on which module the image display is activated after
restarting the extender:
Related topics:
Changing the time span of the input lock
Right for exclusive access to the console
IMPORTANT:
The activation of the
Transm. Redundancy
feature, an additional
SFP
transceiver
and the connection to a second console module are prerequisites for this
operation option.
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
System setup
and press
Enter
.
3. Under
Active at startup
select one of the following options:
none
After restarting the extender, the image display of buth modules
is switched off (
default
)
remote 1
After restarting the extender, the image display of the console
connected to
Transmission 1
is activated
remote 2
After restarting the extender, the image display of the console
connected to
Transmission 2
is activated
4. Press
F2
to save your settings.
Summary of Contents for VisionXS-F-DP-HR
