G&D VisionXS-C-DP-UHR, Installation And Operation Manual

Page: 117 / 212

Installation
G&D VisionXS-C-DP-UHR · 7
English
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the VisionXS-CPU computer module.
Establishing a connection to a local management network
Network: Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
Connecting the computers´s keyboard and mouse signals
USB CPU: Use the
USB-AM/BM-2
cable to connect one of the computer’s USB inter-
faces to this interface.
NOTE: All device variants of the
VisionXS
series can be operated with an
external
power supply at the
Power
interface (for DT variants:
Main Power
).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an
internal
power supply (
Red. Power
).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Network Pwr Main Power Red. Power Service Transmission 2 Transmission 1
Line In Serial USB CPU DP CPU Line In Serial DP CPU