G&D VisionXS-C-DP-UHR, Installation And Operation Manual

Page: 121 / 212

Installation
G&D VisionXS-C-DP-UHR · 11
English
Installing console modules
The remote console is connected to the VisionXS-CON console module. The computer
connected to the computer module can be operated from this console.
Establishing a connection to a local management network
Network: Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
NOTE: All device variants of the
VisionXS
series can be operated with an
external
power supply at the
Power
interface (for DT variants:
Main Power
).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an
internal
power supply (
Red. Power
).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the Config Panel web application from this network and to send sys-
log messages to this network.
Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Network Pwr Main Power Red. Power Service Transmission 2 Transmission 1