G&D DVIVision, Installation And Operating Manual

Page: 17 / 60

Configuration
G&D DVIVision · 13
Configuration
The configuration of the DVIVision system can be changed by the user in both the
setup mode and the setup menu:
 The setup mode is activated through a console keyboard. The configuration can be
changed by pressing special setup keys.
 As an alternative, the setup menu is provided. The configuration can be changed by
using a terminal emulation program and a supplied data cable.
Overview of the functions and the default settings
The following table provides an overview of the configurable functions of the
DVIVision system. In addition, the default settings and references to detailed func-
tion descriptions are listed.
The following pages provide a detailed description of how to operate the setup mode
and the setup menu.
The configurable functions of the DVIVision system are described in detail on
page 17 ff.
Some functions of the DVIVision system can only be carried out in either the setup
mode or the setup menu. Note the advices referring to this on the following pages.
Function Standard setting Page
Activating or deactivating the hotkey delay turned on 17
Using single or double hotkeys single hotkeys 18
Changing the single hotkey Ctrl 19
Changing the double hotkey Ctrl + Shift 20
Timeout of the automatic input lock 1 second 21
Authorising permanent activation of input lock turned off 22
Changing the videomode of the user consoles turned on 23
Activating or deactivating the video compression turned on 24
Support for multimedia or Sun special keys PC Multimedia 25
Support for special keyboards turned off 27
Changing the scancode set of a PS/2 keyboard scancode set 2 28
Activating or resetting a PS/2 mouse 29
Displaying the system’s status information 30
Resetting the default settings 31