Configuration
G&D DVIVision ·
17
Configurational settings
Activating or deactivating the hotkey delay
In the default settings of the DVIVision system, the key combination
Hotkey
+
Backspace
(default:
Ctrl
+
Backspace
) has to be pressed for seven seconds to
start the setup mode. If you want to start the setup mode directly after having pres-
sed the key combination, the hotkey delay can be deactivated.
How to (de)activate the hotkey delay:
set
up mode
1. Press the key combination
Hotkey
+
Backspace
(default:
Ctrl
+
Backspace)
to
activate the setup mode. If the hotkey delay is active, press the key combi-
nation for
seven seconds
.
2. Press one of the setup keys listed below to (de)activate the hotkey delay:
7
activates the hotkey delay
8
deactivates the hotkey delay
set
u
p
menu
1. Establish the connection to the DVIVision system through the terminal
emulation program.
2. Use the arrow keys to select the row
Hotkey Delay
.
3. Press the
Space
key (repeatedly) to (de)activate the hotkey delay:
Yes
activates the hotkey delay
No
deactivates the hotkey delay
4. Press the
S
key to save the settings.