Configuration
G&D DVIVision ·
31
Resetting the default settings
This function resets the default settings of the DVIVision system. By performing this
function, the default settings of the DVIVision system mentioned on page 13 are
reactivated.
How to reset the default settings:
set
u
p mode
1. Press the key combination
Hotkey
+
Backspace
(default:
Ctrl
+
Backspace)
to
activate the setup mode. If the hotkey delay is active, press the key combi-
nation for
seven seconds
.
2. Press the setup key listed below to reset the default settings:
D
resets the default settings
set
u
p
menu
1. Establish the connection to the DVIVision through the terminal emulation
program.
2. Use the arrow keys to select the row
Set System Defaults
.
3. Press the
Enter
key to reset the default settings.
4. Confirm the now appearing security query with the
Enter
key. You can can-
cel the function by pressing the
Q
key.
