Switching between the computers
11
· G&D DVIMUX4-DL-PS/2
Switching commands
The following commands are provided for switching the channel:
Messages
The KVM switch confirms the successful execution of a command and otherwise
sends a meassage.
Command
Channel
1!
1
2!
2
3!
3
4!
4
<!
switch to previous channel
>!
switch to next channel
ADVICE:
Use the »
?!
« command to show the currently accessing channel.
NOTE:
The serial device carries out the command
directly
after it has been sent.
A message (see below) informs the serial device concerning the success or failure
of the switching of channels.
Message
Meaning
In
[x]
All
switching to channel
[x]
successful
E01
invalid channel number (out of range)
E06
channel switching has failed
E10
invalid command
E13
invalid value (out of range)
RS232 mode enabled
switch mode (RS232) enabled
