G&D DP-HR-U, Installation And Operations

Page: 117 / 196

User module »DP-HR-U-CON-Fiber«
Target and user modules (DP-HR-U) · 112
LED Out:
If you expanded the functional range of the matrix switch by purchasing the
TradeSwitch function
, connect the optional
TS-LED-2
(order number A6100041) to this
interface.
Connection to the matrix switch
Transmission|Tx:
Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the
Rx
interface of a
Dynamic Port
provided at the matrix
switch.
Transmission|Rx: Insert the LC plug of a compatible optical fibre cable. Connect the
other end of the cable to the Tx interface of the same Dynamic Port provided at the
matrix switch.
Power supply
Main Power:
Connect the power cable to the power pack and a power outlet.
Red. Power: If required, connect the power cable of the optional power pack to this
interface. This provides a redundant power supply. Connect the power cable with
the power pack and a power outlet of a different power circuit.
Start-up
Start the user module by pressing the Main Power button of the power pack.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
They meet the requirements in accordance to EN 60825-1:2014 as well as
U.S. CFR 1040.10 and 1040.11 .
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam on page 3
 Always connect optical connections or cover them with protection caps on page 3
 Only use G&D certified transmission modules on page 3
NOTE: Use optical fibres with LC plugs to connect the devices. The cables are
available as accessories.
NOTE: You can also connect the target module
directly
to a compatible user module.
ADVICE: The active hotkey configuration is displayed during the
System Startup
of
the matrix switch.