G&D DP-HR-U Installation And Operations Download Page 164

Page: 164 / 196

User module »DP-HR-U-CON-Fiber-DH«

159

· Target and user modules (DP-HR-U)

Required accessories



1 × Compatible optical fibre cable to connect the user module to a KVM matrix

switch of the

ControlCenter-Digital

series

Installation

Connecting console devices

DisplayPort Out 1:

Connect the first console monitor.

DisplayPort Out 2:

Connect the second console monitor.

Micro In:

Connect the console microphone (optional).

Speaker:

Connect the console speakers (optional).

Keyb.:

Connect the console’s PS/2 keyboard.

Mouse:

Connect the console’s PS/2 mouse.

Keyb./Mouse:

Connect the console’s USB keyboard and/or USB mouse.

Generic:

By default (

Keyb./Mouse

mode), you can use this interface to connect another

USB input device or supported displays or tablets.

Enable the

Generic HID

mode (see page 175 f.) if you want to connect another USB

input device. In this mode, data of the USB input device remains unaltered when

transmitted to the active target module.

USB Devices:

Connect any USB devices to these interfaces. The data stream of the

connected USB device is transmitted to a compatible target module with up to 16

Mbit/s.

NOTE:

Check the monitor's manuals if the OSDs provide a setting for the mode of

the DisplayPort input. If so, select the mode in which the image data is processed

according to the standard

DisplayPort 1.1

NOTE:

Console keyboard and console mouse can be connected to the user module’s

USB

PS/2 interfaces.

IMPORTANT:

With enabled

Generic HID

mode, it is

not

possible to operate the OSD

with a keyboard connected to the

Generic

socket.

Main P

ower

Red. Power

Micro In

DisplayPort

Out 1

Out 2

Transmission

LED Out

Keyb./Mouse

Speaker

Generic

Mouse

Keyb.

USB Devices

Summary of Contents for DP-HR-U





































































































































































































Search results

Summary of Contents for DP-HR-U

Reviews:

Related manuals for DP-HR-U

Brands by name

Popular brands

G&D DP-HR-U, Installation And Operations

Search results

Summary of Contents for DP-HR-U

Reviews:

Related manuals for DP-HR-U

Brands by name

Popular brands