G&D DL-Vision(M/S)-AR, Installation And Operation Manual

Page: 23 / 56

Configuration
G&D DL-Vision(M/S) · 19
Configuration
The KVM extender can be configured in the setup menu or via
Config Panel
web appli-
cation:

The
Setup mode
is activated through a console keyboard. The configuration can be
changed by pressing special setup keys.

The
Config Panel
web application provides a graphical user interface to configure
and monitor the KVM extender via web browser.
Overview of functions and default settings
The following table provides an overview of the functions that can be configured in
the KVM extender. In addition, the default settings and references to detailed func-
tion descriptions are listed.
The following pages provide a detailed description of how to operate the setup
mode (see page 20) and the Config Panel web application (see page 21).
NOTE: Some functions of the KVM extender can only be executed in the setup
mode or via the Config Panel web application. Note the advices referring to this on
the following pages.
Function Default setting Page
Enabling/Disabling the setup mode enabled 23
Enabling/Disabling the hotkey delay 7 seconds 24
Changing the hotkey Ctrl 25
Changing the time span of the input lock 1 second 28
Right for permanent console access switched on 29
Changing the console video mode switched on 30
Selecting the EDID mode of the KVM extender Auto 31
Freeze mode enabled 32
Support for Multimedia and Sun special keys PC Standard 33
Support for special keyboards switched off 35
Changing the scancode set of a PS/2 keyboard Scancode set 2 36
Starting the user module without keyboard activated 37
Enabling or resetting a PS/2 mouse 38
Resetting the default settings 39