Configuration
G&D DL-Vision(M/S) ·
39
Resetting the default settings
This function resets the default settings of the KVM extender. By performing this func-
tion, the default settings of the KVM extender listed on page 19 are reactivated.
How to reset the default settings:
NOTE:
This function can only be carried out in the web application.
Co
nfi
g
Pa
nel
1. Click the tool symbol in the tool bar.
2. Click the tabs
Tools > Default settings
.
3. Use the information in the fields
Device
and
Comment
to check if you have
selected the correct device.
4. Disable the option
Delete IP addresses
for maintaining the configuration of
the network interfaces.
5. Click
Default settings
to reset the default settings.
NOTE:
The default settings can also be reset by pressing the
Reset
button.
Further information regarding this topic are given on page 17.
