G&D DL-Vision(M/S)-AR, Installation And Operation Manual, Page: 33 / 56

Configuration
G&D DL-Vision(M/S) · 29
Right for permanent console access
If no inputs are being made at the active console during the adjusted time span of
the automatic input lock (default: 1 second), the default settings of the KVM
extender permit the other console to operate the extender.
If the function right for permanent console access is activated in the web applica-
tion, the user is enabled to permanently activate the input lock with the key combi-
nation PrtScr (default: Ctrl+PrtScr ).
Pressing this key combination deactivates the input devices of the concurrent con-
sole. By pressing the key combination again at the active console, both consoles can
operate the KVM extender again.
How to select the right for permanent console access:
Related topics:
 Exclusive operation of the KVM extender on page 16
 Changing the console video mode on page 30
NOTE: This function can only be (de)activated in the web application.
NOTE: The control LEDs
NUM
,

and
Scroll Lock
are blinking simultaneously if
the setup mode has been successfully activated.
The blinking
Scroll
LED at the active console indicates that the exclusive opera-
tion of the KVM extender has been activated.
Conf
ig P
anel
1. Use the tree view to click on KVM Extenders > [All Extenders] .
2. Double-click the computer module of the KVM extender to be configured.
3. Click the Consoles tab.
4. Use the field Permanent Access mode in the paragraphs local console or remote
console to select between the following options:
Enabled  gives right for permanent access
Disbaled  denies right for permanent access
5. Click OK to save your changes.