Gana GN-708VN, User Manual

Page: 8 / 18

14
2. Back Panel
1) VGA Port (VGA)
For connection CCTV monitor and PC monitor directly
2) Monitor Port (MON 1, MON2)
For connection DVR and monitor, available to monitor 2 monitors at the same
time, also, you can back up by connecting one to monitor and connecting the
other to VCR
3) AUDIO IN, AUDIO OUT
This DVR provides 1 channel audio independently. To record voice at the same
time, Audio in– connection for mike, Audio out– connection for speaker (mono)
4) Network Connection (ETHERNET)
For connection DVR and computer or Router. You can see the flash on LED when
connected.
5) CAM 1 ~ CAM 4
For Connection DVR and Camera. connect with BNC port. If you want to connect
by RCA port, use BNC transfer adaptor. Before connecting, choose numbers for
each camera.
6) PS2/MOUSE
For Connection general PC and PS2 type mouse. To set up easier and to set up
motion area conveniently , install mouse for using it.
7) RS485 PTZ/Alarm Terminal Block (Option)
For Connection with Alarm input equipment to this part and with this part to output
part. Input can be available for 8 channel. Output can be 1 though RELAY OUT.
By using RS485A, RS485B connection part, adjust camera for PAN/TILT/ZOOM
function.
IV. How to use
15
8) DC power Input
Connect power switch adaptor to DVR. This product includes adaptor. [Input :
AC 100-240V, 50/60Hz, 0.8A / Output : DC +12V == 3A (or 3.5A)]
9) Power switch
ON/OFF
3. Remote Controller
This is remote controller.
1.
Up from below picture, by using these keys, set up DVR menu conven-
iently.
2. On centre keys, From C1 to C8, if you press number 1, you can watch
number 1 channel in a full screen.
3. Under from below picture, these keys for PAN/TILT keys. These keys are
not available for this product.
IV. How to use
Camera 1,2,3,4 button and
Quad/Full display button
PAN/TILT control of a speed dome
Recording button
Play button
USB button
List button
Menu/Stop button
Arrow button in Menu mode
FF/REW Button in Play mode
OSD On/Off