Gana GN-708VN, User Manual

Page: 13 / 18

24
IV. How to use
○
3 Time Set
Time zone is sorted by each country.
◄ , ► - moving cursor
▲ , ▼ - changing value
After set the time, press “apply”
If this DVR is connected on internet network,
you can update automatically by
synchronizing through NTP server. You can
set up server address with these keys
◄ , ► ,
▲ , ▼
NTP (Network Time Protocol) perform to
synchronize time, the company or website
where supply service manages to run server.
If synchronize by NTP server, to synchronize the time, press ‘yes’ on “
synchronizing to server”, then DVR will synchronize the time in every minute
automatically. (Must use NTP IP address)
○
4 Event list
Before mentioned, if you press list button, it will execute same as
appearing event list (page 8 reference).
○
5
Network Settings
At EHERNET port, Connect network cable to
router or internet, then select yes on network
setting.
First of all, to use the remote controlling
network function, it is advised to connect
DVR and PC, then to install viewer software
into PC which is provided by the
manufacturer. User should allocate IP
address of TCP/IP structure fitted with
Window OS according to prescribed rule,
then affiliate (join) to local IP. If there is a
Name server, the content should be inputted
together, Also, the password should be
same on Viewer software in PC and DVR.
The resolution is selectable, Very High, High,
Standard, Low, Very Low.
The present DVR services 3 diverse network
joining modes.
1. STATIC, 2. DHCP for dynamic IP, 3.
PPPoE
User opt, use above, with these technical capacity, be able to remote-control,
monitor DVR though network joining.
25
○
6 F/W Upgrade
You can upgrade Firmware by inter con-
necting USB to DVR after duplicating the file
furnished by the manufacturer. Pressing
button, you should identify whether there is
new substance or not, then, advance up-
grade conformably to a scene.
. After completion of the Firmware upgrade
and reboot, it processes to execute in new
setup.
* Caution : Manufacturer or Supplier Shall not
be held responsible for program malfunction when user upgrade themselves. (We
are not recommend upgrade without serious system problem.)
8) Search
Implementation function equivalent front panel or PLAY/PAUSE button.(
page 9 by comparison )
9) Language
You can opt OSD (on screen display)
language. General language furnished
are English, we are prepared to pro-
duce Korean, Japanese and Chinese
versions. So you are advised to confirm
which language is supported in pack-
age before purchasing.
10) Exit
User should apply settled figure. ‘close
after save’, ‘close after unsaved’,
‘settled figure default’, among these
three, select by
▲ , ▼ then, apply by
► .
IV. How to use