14
6.4 NETWORK SET
6.5 SENSOR SET
CHANNEL SELECT : To select cannel for setting with sensor (CH 01 - 16)
ALARM ENABLE : To set of Alarm operating or not (ON / OFF)
MOTION ENABLE : To set of Motion detection operating (ON / OFF)
MOTION LEVEL : To set of Motion operating level (VERY HIGH – VERY LOW)
BUZZER TIME : To set dwell time of buzzer sound when Motion detected (0 – 99 Sec)
SENSE REC TIME : When ALARM/Motion occurred, to set recording time (1~99 MIN)
OFF: CONTINUE
6.5.1 MOTION AREA SET
As you see above, Yellow area is Motion detecting
area. The other black area is no Motion detecting
area. You can move cursor from Yellow area to
Black area, then able to set as Motion detecting area
by pressing Enter key.
* If pressing Long key of body, all area will be
changed as the cursor locating.
SUB NET : To set Subnet Mask
GATEWAY : To set Gateway
IP ADDR : To set IP Address
NETWORK ENVIRONMENT : To set network envi-
ronment (LOCAL / EXTER)
Local :
External:
Summary of Contents for GN-716J
Page 1: ...USER S MANUAL GN 716J 16 Channel STAND ALONE DVR GANA I C Co LTD...
Page 9: ...9 5 Display Modes...
Page 23: ......
