GANA I & C Co GN-716J, User Manual

Page: 13 / 23

13
6.2.3 AUTO SEQUENCE SET
If pressing Enter key at AUTOSEQ SET in DISPLAY SETUP,
You can set dwell time for each camera in AUTO screen mode.
Y
ou can set Dwell time of display of each channel.
(0~99sec.)
* To go out from current mode, please press MENU/EXIT Key.
To select Border line color (BLACK / WHITE / GRAY)
6.2.4 BOUND COLOR SET
6.2.5 BLANK COLOR
BLANK COLOR : To select the color of Loss screen (BLACK / WHITE)
6.3 RECORD SET
OVER WRITE : To set OVER WRITE (YES / NO)
* OVER WRITE ( When HDD is full, it will write from
first section of HDD)
REC SPEED : To set speed of recording
( 1F, 2F,3F,5F,12F,20F,30F,60F)
Ex) 60F/sec : Record 60 field per 1 second.
1F/sec : Record 1 field per 1 second.
REC QUALITY : To set recording quality as 4 steps
(VERY HIGH / HIGH / LOW / VERY LOW)
RESOLUTION : Field
PLAY BACK SPEED : To set speed of Playback
Ex) 60/sec : Playback 60 field per 1 second.
1/sec : Playback 1field per 1 second.
AUDIO CH EN : To select certain channel for Audio
output. Ex) If selecting CH1 for Audio, the color of
CH1 Will be displayed as Yellow in main screen.