22
9. LOCK
9.1 SYSTEM LOCK
User can lock all system in this mode in order to nobody can change the setting.
When you want to lock SYSTEM, enter PASSWORD then retype the same PASSWORD.
User must use 4 numbers 1,2,…,8(1/9,2/10,…,8/16). When complete SYSTEM LOCK,
1/9,2/10,…8/16,MODE, direction keys and ENTER key will be able to use.
9.2 SYSTEM UNLOCK
When you want to release SYSTEM LOCK, just press LOCK key again by entering PASS-
WORD.
And back to main mode by pressing MENU key.
10. ADMINISTRATOR OPERATION
10.1 FIRMWARE UPDATE
Before POWER ON, in condition of pressing MODE key, then turn one power.
Now SYSTEM will be initialized then go to F/W(FIRMWARE) UPDATE Menu.
Then carry on F/W UPDATE to connect USB memory.
11.INSTALLATION
11-1. How to install
(1) Please check proper product contents after opening box.
(2) Please check AC115V/230V at real of this equipment.
Before connect power cable to this equipment, make sure the Input voltage selection
switch at rear.
Please select proper voltage for your usage( 115V /230V )
(3) Before connect power cable, please check power switch of this equipment is OFF
(4) Please check proper camera connection at rear.
(5) Connect cable of VIDEO OUT/MON/VCR/S-VHS to monitor/VCR.
(6) Please check AUDIO IN/OUT CABLE.
(7) Connect ETHERNET PORT and LAN.
(8) Connect cable to ALARM PORT.
(9) Now turn on Power switch.
(10) Please check SYSTEM INITIALIZING on monitor.
(11) Please set Network or other by remote controller or MENU keys.
Summary of Contents for GN-716J
Page 1: ...USER S MANUAL GN 716J 16 Channel STAND ALONE DVR GANA I C Co LTD...
Page 9: ...9 5 Display Modes...
Page 23: ......
