Gamry Instruments LPI1010, Operator'S Manual, Page: 51 / 69

Chapter 6: Adding a new Load/Power Supply to Framework
6-15
[CalSignalOffsetIRangeX]
There are one or more sections used during calibration of the Signal offset. The number of sections has to be equal
the number of current ranges on the power device. The example bewow depicts the information for a BP4610
power supply from NF Corporation which has a single 10 A current range. Each of the keys for this section will be
discussed below.
[CalSignalOffsetIRange0]
CalCellValue = 0.2
CalCell = 200 mOhm Cal Cell
VchRange = 0.2
IchRange = 0.2
IAppliedScan0 =0.3
IAppliedScan1 =0.3
IAppliedScan2 =0.5
TApplied = 1.0
TRest = 0.1
Enabled = 1