Dimmer Freq
1200k, 2400k,
4000k, 6000k
Allows you to change the PWM frequency of the LED’s.
Fan Speed
Auto, Slow,
Height
Set the fan speed. Auto is recommended.
Back Light
On, Off
Sets the LCD Backlight to stay on or turn off when not in
use.
White Balance
Red, Green,
Blue
0-100 for each color – allows you to scale the maximum
value of each color if desired. Use with care.
Language Setup
English, Chi-
nese
Sets the menu language – USE WITH CAUTION! If you do
set the language to Chinese (and you aren’t a fluent
reader), follow the order of the menu items here to find the
language menu again and reset it to English.
RDM Infor
Displays RDM device information
Auto Test
Test...
Places the light into an auto-test function. Watch your fin-
gers when you press “enter”!
Reset
All Reset, PT
Reset, Zoom
Reset
Allows you to reset parameters of the light.
Version
Displays the firmware versions of the internal components.
DMX Setup
DMX Basics
DMX512 stands for digital multiplex 512. This means that 512 channels are controlled
digitally through 1 data cable.
A channel is a set of 255 steps that are assigned to control attributes in each light. This
may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.
Multiple sets of 512 “universes” may be used. Only 1 universe will travel on a DMX cable,
but through networked DMX (Art-Net or sACN E1.31), many universes can travel over a
network.
DMX Wiring
DMX works by connecting 1 or multiple lights to the output of a DMX lighting console or
software with a DMX interface.
DMX lights connect in what is called a “daisy-chain”. Your first DMX cable will plug it’s
male DMX connector into the female DMX connector on your lighting console. The re-
maining female connector will then connect to the DMX input on your first light.
Silhouette Borealis X Z – GAMMA LED Vision
Page 7 of 18
