Gamma M1-3, Instruction Book

Page: 12 / 64

4. Memory function
1. Under power o ff . Hold or for
3 seconds , get into relative memory mode, it
reads the average of latest 3 measurements,
press “SET” to fi nd more memory.
t "GUFS NFBTVSFNFOU QSFTT i4&5 UP SFBE
the average of latest 3 measurements.
2. Press or t
о cut o ff the power.
t MGGPSHFUUPUVSOJUPò"VUPNBUJDBMMZQPX -
er o ff in one minute.
t .PSF UIBO NFBTVSFNFOUT JU XJMM EF -
letes the earliest one automatically
t 5IFTUPSFENFNPSZXJMMOPUMPTFBGUFSSF -
placing battery.
3. Delete memory (all the memory will be
deleted). Showing memory, hold “SET” for 5
seconds, display “
“ means all the mem-
ories have been deleted.
5. Error Messages/Troubleshooting
If an error occurs during a measurement,
the measurement is discontinued and a cor-
responding error code is displayed (picture:
error no. 2)
t 1MFBTFDPOTVMUZPVSEPDUPSJGUIJTPSBOZPUIFSQSPCMFNPDDVST
repeatedly
Other possible errors and their solutions
If problems occur when using the device, the following points
should be checked: