Gamma GBF220, Technical Installation Manual

Page: 49 / 52

γ
TM
GAMMA
γ
TM
49
P R O O F
16.0 Ancillary Products
Fittings to Gamma Bracing Frames
16.4 Electrical Equipment
All electrical equipment must be installed by a Registered Electrician in accordance with AS/NSZ 3000:2017. Tables 5 & 6
below detail accessory fittings that can be installed to the Gamma Bracing frame. Other larger and heavier items such as
sinks, toilet cistern’s and wall mounted television screens will require mounting directly to the timber studs.
Additional timber frame may be required. Follow manufacturers installation instructions.
Electrical flush mount boxes
Insulated pipe mounting brackets and wing backed plumbing fittings
TABLE 5 Electrical Equipment
Electrical Accessories Type
Fastener Types
Rivets Tek Screws Bolts/Threaded Rod
Electrical switch mounting box
1/8” to ¼“ 6g to 14g M4 to M12
Electrical socket outlet box
Electrical mounting brackets clips
Electrical wall mounted light fittings
Telephone socket outlets
Internet/Computer socket outlet
Television Arial outlets
Data mounting bracket & Clips
*Note - All electrical cables to be properly insulated.
TABLE 6 Plumbing Fitting Equipment
Plumbing Accessories Type
Fastener Types
Rivets Tek Screws Bolts/Threaded Rod
Tap fi brackets
1/8” to ¼“ 6g to 14g M4 to M12
Shower Head fi brachets
Pipe work + mounting brackets/clips
• Galvanized Pipe
• PVC Pipe
• Copper Pipe (*Refer Note)
*Note - Ensure copper pipe is well insulated when installing with Gamma Bracing Frames. Contact between Copper and Galvanized
Steel causes electrolysis resulting in the corrosion of components. Use of grommets in access holes and insulated brackets and saddles
when mounting directly to Gamma Bracing Frames will be required.
16.5 Plumbing Equipment