γ
TM
GAMMA
γ
TM
47
P R O O F
15.8 Height Adjustment
‘39mm Down’
Position
46
110
85
135
‘25mm Up’
Position
‘As Supplied’
Position
‘50mm Up’
Position
(maximum)
15.8 Construction Details - GBF Height Adjustment
The height of the Gamma Bracing frame can be adjusted to suit
variations in the wall framing height or the alignment of the wall
framing.
The height of the Gamma Bracing Frame can be increased by no
greater than 50.0mm and decreased by no greater than 39mm to
allow for any small deviation in wall framing height.
To adjust the height of the GBF it is permitted to remove the two
rivets that hold each of the hold down brackets in place which
allows the brackets to be adjusted up or down.
To increase the height of GBF each of the hold down brackets will
require adjusting downwards from the side channels of the GBF by a
maximum of 50mm
All 12g x 40mm Tek Screws MUST be installed to each of the hold
down brackets and the GBF frame. (Qty of 8 Screws per Hold down
bracket - supplied).
Summary of Contents for GBF220
