Gamewell FLEXALARM 620, Installation & Operation Manual

Page: 98 / 108

Change Code
The codes in the Flex 600 systems are assigned to the input groups. When a device
within that group alarms, that code would be sounded on the signal circuits that have
been programmed as coded circuits. Each input group may be assigned an individual
code that contains up to 6 digits. The digits are defined in hexadecimal and range
from 0-9 and A-F. When selected each digits (1-6) of the code is entered
individually.
After the code has been entered a sub menu appears. This menu allows you to
change the Timing, the number of Cycles and the output of the signal circuits after
the code is complete, silence or March Time signal.
Change Menu 1
1=Pass 2=Code 3=Date 4=Seq
5=Baud 6=Words 0=Exit
>2
Enter Input Ckt/Group Number:1
Current Code For Ckt/Group1=123456
Enter Digit 01:656565Re-enter Input :6
Enter Digit 02:5
Enter Digit 03:4
Enter Digit 04:3
Enter Digit 05:2
Enter Digit 06:1
New Code For Ckt/Group1=654321
Enter Input Ckt/Group Number:
Change Coded Signal's Parameters
1=Timing 2=Cycles 3=Signal
0=Exit
>1
Change Coded Signal's Timing
1=0.5 2=1.0 3=1.5 4=2.0
0=Exit
>2
Enter # of Cycles (1-8):
>3
Choose Signal
1=OFF 2=March Time
0=Exit
Technical Manuals Online! - http://www.tech-man.com