12
KEEP THIS MANUAL
Always run the pump for at least 2 hours when adding chemicals to
you pool or spa to circulate them throughout the water.
Below is an example of “Time for Chlorination”
1) You will see this message along with a blinking red light.
2) Press the next button. In this case, ePOOL tells you to add
10 ounces of Liquid Chlorine.
Select NOW if you plan to add the dose immediately.
3) This starts the 8 hour stabilization period.
After you follow the treatment recommendation, allow ePOOL 8 hours for the
treatment to stabilize. After 8 hours, ePOOL will advise you if your chemical levels
are balanced by displaying the “POOL IS OK” message. If further treatment is
needed, ePOOL will give you further instructions.
