background image

11

KEEP THIS MANUAL

12) Please verify that the serial number shown on the screen 

matches the number on the back of your receiver (the last 
6 numbers before the dash; see example below). 
Press OK to continue. 

If serial number does not match, press CANCEL. The
unit will reset and display a new number. You may have
to repeat this several times. If, after the third try, the 
number does not match, contact GAME Customer Service  
at 1.888.339.2546. 

Record your serial number 

here for your records

You have now finished the setup process. ePOOL will now monitor your pool
chemicals and will tell you when, what and how much to add when your water 
chemistry is out of balance. One of the 4 following screens will appear after
ePOOL initializes.

13)  If your POOL is within the IDEAL chemical range, the light

will be green and the “Pool is OK” message will appear on
the screen.

Select MENU to enter the main menu screen.

14) If the pool chemicals are not within an IDEAL range, the

light will be blinking red and one of the following 3 screens
will appear:

• Time for Chlorination

• Time for Acid

• Time for Soda Ash

Press NEXT to find out dosage required.

`

Summary of Contents for epool 4817





























Reviews: