Instruction Manual :
PLATFORM 2-MAN LADDER STAND
15
ASSEMBLY INSTRUCTIONS
STEP 1
FIGURE 1
NOTE: When selecting a tree to install the
treestand in, never use a treestand on a dead,
leaning, diseased or loose barked tree, or a utility
pole. Always avoid electrical power lines.
1. Attach platform sections (16) together using two 1/4-20 x
2-1/4 IN bolts (35) and locknuts (41).
SEE FIGURE 1.
NOTE: Platform sections must be oriented as
shown in FIGURE 1.
2. Attach platform sections (16) to J-tubes (7) using
four 1/4-20 x 2-1/4 IN bolts (35) and locknuts (41)
SEE FIGURE 2.
Attach bottom tree blade (15) to J-tubes (7) using
four 1/4-20 x 2-1/4 IN bolts (35) and locknuts (41).
SEE FIGURE 2.
STEP 2
Do not tighten any nut and bolt combinations completely
until all parts are assembled together! Finger tighten plus
one turn of a wrench only! This will temporarily hold the
locknut on the bolt while helping alignment of all parts!
After all parts are assembled together, all nut and bolt
combinations must be completely tightened.
FIGURE 2
16
35
41
16
35
7
16
41
16
41
15
35
mesh hidden
for clarity
mesh hidden
for clarity
