Instruction Manual :
PLATFORM 2-MAN LADDER STAND
19
STEP 9
9. Install M6 x 29 MM knobs (45) and M6 x 20 MM bolt
(30) onto left (8) and right (9) seat supports.
SEE FIGURE 9.
Attach shooting rail assembly (11 and 17) to
backrest (12) using two M6 x 70 MM bolts (31),
plastic spacers (38) and M6 x 10 MM knobs (44).
SEE FIGURES 9 AND 9A.
NOTE: Be sure hardware is installed as shown
in FIGURE 9. Depth of the shooting rail is also
adjustable at this time.
Attach shooting rail pad (24) to shooting rail (11).
FIGURE 9
STEP 10
FIGURE 10
FIGURE 9A
30
45
11
8
31
12
38
44
10
16
17
41
40
35
40
24
10. Attach footrest (17) to front platform section (16)
using two 1/4-20 X 2-1/4 IN bolts (35), four orange
plastic washers (40) and two locknuts (41).
SEE
FIGURES 10 AND 10A.
FIGURE 10A
mesh hidden
for clarity
