G
AMATRONIC
E
LECTRONIC
I
NDUSTRIES
L
TD
.
P+ PREMIUM 60, Installation Guide,
rel.
1.4
57
9.2
G-Eye
Figure 56: G-Eye
G-Eye adds value to your Power+:
•
Option to connect external temperatures sensors, humidity sensors, and frequency sensors.
•
Inputs for ac/dc current and voltage measurements through various sensors.
•
When the measured value moves outside a user-defined range, G-Eye immediately informs pre-
selected targets of the alarm condition.
•
One 4-20 mA input.
•
Input dry contacts available for on/off external sensors.
•
Output dry contacts for control of external devices.
•
Supports TCP/IP and SNMPv2.
•
Controlled shutdown of servers on ac mains power failure, with user-defined time-delay. (*)
•
Auto-wake-up of servers on restoration of ac power, after user-defined time-delay. (*), (**)
•
Include internal GSM modem (quad-band) for additional backup/control/management without LAN
dependency.
•
Bi-directional control via simple SMS commands.
•
Automatic response to sensed events. For example, the G4 can be programmed to turn on an air
conditioner when it senses that the room temperature has exceeded a user-defined level.
•
Notifies designated targets of alarm conditions via email, SMS, and SNMP traps.
•
Double power feed for reliability.
•
Internal battery backup.
•
Quick installation.
(*) Not all operating systems supported.
(**) Auto-wake-up requires "wake-on_LAN" BIOS feature on target computers. Not all operating systems
supported.
Note: G-Eye requires disconnection of the Power+ Premium 60 internal network card.
Consult your vendor before ordering.