![background image](http://html1.mh-extra.com/html/gama/evolution-g-50-h/evolution-g-50-h_service-manual_3303563044.webp)
evolution G-50 H
Service Manual
44/48
Issue 3.2
SHAFT SEAL
Insert the seal (1) into Tool A
(2). Make sure that the lips
are facing upwards.
Place tool A with the seal (3)
inside the seal housing (4).
With tool B (5) push the seal
until it stops against the seal
housing (4).
Place the shaft bearing (6)
and the seal housing along
with its corresponding O-
rings (7) on the packing
retainer flange (8).
Insert the shaft assembly (10)
into the pump body (9) and
place the tool C (11) on the tip
of the shaft.
Mount the packing retainer
flange assembly with all
components assembled (12)
on the front face of the pump.
The shaft bearing should be
visible from the outside.
Remove tool C and fix the
packing retainer flange with
its corresponding screws.