page 3
1
. Attach the body (D) to
the stem(E) with the four
supplied screws, as shown.
8.1
.
Mark three holes using the
base plate as a template.
Use electric drill to make the
holes. Place anchors in holes
and secure with screws .
9.1
.
Attach Part
(G) to Part (H)
Using the four
small screws from,
as shown
8.2
.
Attach the three
decorative caps provided.
Continue by screwing the
pole to the base.
9.2.
Insert the
Turning bar (I) in
the hole through
the anchor stake
(G+H) as shown.
9.4
Occasionally check the
anchor Level Tool to ensure
your Post is straight.
9.5
Stop turning once Part (G) is flush with
ground.
9.6
Remove the Turning Bar (I).
9.7
Screw the Pole to the Anchor.
2.
Place the lens and
cone (C) into the
body (D+E).
4.
Attach top (B) to the
body (C+D+E) with
the two supplied
screw caps
5.
Attach Side handles
provided.
6.
Screw Finial to the top.
7.
Assemble pole by screwing the four pieces together.
Assembly Instructions:
Installation on flat surface
(Without the Anchor):
EZ Anchor
Installation
Instructions:
3.
Install the
bulb and turn
on switch
to desired
setting
Operation Switch
9.3.
Place anchor in desired location
and apply downward pressure while
turning the Turning bar clock wise.
D
E
D+E
B
C+D+E
C
G
G+H
I
H
