background image

If you choose to vary from these instructions your warranty will be impaired

8

KITSET WOODEN FLOORS

Every shed must have a floor. These are available from your local reseller or contact 

[email protected]

FLAT FLOOR CLAMPS

For existing concrete only. Water can 

seep underneath.

INTERNAL DIMENSIONS

GVO 3023

2985MM X 2235MM

SHED

PEG THE FLOOR TO THE GROUND IN A WINDY AREA

RUNNER

FLOOR BOARD

WARRANTY

Thank you for purchasing a GALVO shed. We offer you a 15 Year warranty for Classic range and 18 Year warranty on the GALVO Premium range. The warranty is very simple - “if any part or component of your shed fails, we will send you a new part or component”. Your GALVO shed 
will require very little maintenance unless it is situated near the sea/ocean or any other harsh environments e.g. sulphur, etc* If your GALVO shed is situated near the sea or harsh environments we suggest you wash the shed regularly (every 3 months or less) to prolong the life of 
your shed. However the warranty that we offer will be overridden by the warranty/guarantee offered by the original manufacturer of the steel. 

The conditions listed below apply and are applicable to the 15 and 18 year warranties:

(a) 

the warranty shall not cover any defect or damage which may be caused or partly caused by or arise through:

 (i) 

failure on the part of the Customer to properly maintain any Goods; or 

(ii)

 failure on the part of the Customer to follow any instructions or guidelines provided by 

the Supplier; or 

(iii)

 any use of any Goods otherwise than for any application specified on a quote or order form; or 

(iv)

 the continued use of any Goods after any defect becomes apparent or would have become apparent to a reasonably prudent operator or user; or 

(v)

 the storage 

of caustic materials (including but not limited to acids, fertilisers or hazardous chemicals); or 

(vi)

 Fair wear and tear, any accident or act of God. (including weather) 

(b)

 The warranty shall cease and the Supplier shall thereafter in no circumstances be liable under the terms of 

the warranty if the workmanship is repaired, altered or overhauled without the Supplier’s consent. 

(c)

 in respect of all claims the Supplier shall not be liable to compensate the Customer for any delay in either replacing or remedying the workmanship or in properly assessing the 

Customer’s claim. 

(d)

 Your shed must be raised above ground level (of natural earth substrate) by at least 70mm.

For Goods not manufactured by the Supplier, the warranty shall be the current warranty provided by the manufacturer of the Goods. The Supplier shall not be bound by nor be responsible for any term, condition, representation or warranty other than that which is given by the 
manufacturer of the Goods. Where the Supplier is required to perform labour associated with the replacement or repair of defective Goods under manufacturer’s warranty, the labour performed shall be charged at the Supplier’s hourly rate. We wish you many years of trouble free 
storage of your valuable assets and we would be only too happy to assist with any questions you may have. Email to 

[email protected] 

The team at Storetech Industries Ltd, suppliers of GALVO sheds.

*The GALVO Classic range is not covered by warranty within 2 kms of the sea or if it’s situated in thermal regions, but is priced accordingly.

RECESSED FLOOR 

CLAMPS

For poured floors with a recess  

around the perimeter.

BOXING DIAGRAM

20MM - 25MM

(1 ' X 1 ')

INTERNAL DIMENSIONS

SHED

RECESS

20MM - 25MM

8MM BOLT SET INTO CONCRETE

100MM

25MM

25MM

APPROX

APPROX 25MM RECESS  

AROUND THE OUTSIDE

25MM

2985MM

INTERNAL 

MEASUREMENT

2235MM

STEP 9 

COMPLETE YOUR SHED

RECESSED CONCRETE FLOOR PLAN FOR SPECIALLY  

POURED CONCRETE FLOORS: 

SPECIFICATIONS

Every shed must have some type of foundation between it and the ground. You can pour a concrete floor and use recessed floor 
clamps, use an existing concrete base with flat floor clamps or purchase a kitset wooden floor from your nearest reseller. 

Summary of Contents for GVO 3023









Reviews: