© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 2.1, 2 December 2021, Page
5
of 6
REMOVE & INSPECT CARTRIDGE
1. Remove Handle
−
Ensure the water supply is closed.
−
Unscrew the handle and remove the grub
screw.
−
Remove the handle body
2. Remove Cap and Retaining Nut
−
Unscrew the cap and retaining nut from
the body
3.
Remove and Inspect Cartridge
−
Remove Cartridge
−
Inspect for debris and clean. Replace if
necessary.
Note: For cartridge replacement, use WaterMarked
Standard/Universal 35mm Flat Cartridge. For more
information, please contact Galvin Engineering
4.
Reassemble
−
Reverse steps 1 to 3 to reassemble
ensuring the orientation is correct.
−
Test for leaks and correct operation.
Handle
Grub screw
Handle body
Retaining nut
Cap
Cartridge
