© Copyright
Gallo Technologies
. All Right Reserved
- 4 -
52008
c.)
Lock only by remote:
When the ignition key is
ON
, pressing
will lock the doors and the system will remain in the
disarmed
mode.
Siren Button: Car-Locating/Anti-hijack
a.) Car Locating
When the system is
armed
, holding this button for more than 2 seconds, the siren will chirp and the
parking lights will flash five times.
b.) Anti-Hijack
:
When the ignition key is in the
ON
position and the system is
disarmed
, holding this button for over
2 seconds, the parking lights will flash twice.
After 40 seconds, the siren will chirp (non-continuously) for 20 seconds. After the 20 seconds, the
siren will chirp louder (continuously) and the parking lights will flash for another 60 seconds. After the
60 seconds of siren and lights flashing the system will be in the
armed
mode, and the starter will be
disabled.
Pressing the
button will deactivate the Anti-hijacking mode.
The
has numerous user configurable features that can be enabled or modified
according to user’s preferences.
This section explains each of the user configurable
functions. See section 1.4
Programming Function Set-Up Options
for details on how to
modify configurable features. When installing as a stand alone “Engine Start” configuration
(without door lock & alarm functions) the only
functions that can be used are
those marked with an (*).
*
Valet Mode:
If Valet Mode is set to
ENABLE
, pressing
or
will lock/ unlock the doors only. All alarm
triggers will be disabled. The Green L.E.D. on the Engine Start button will flash for 10 seconds when the ignition is
turned from
OFF
to
ON
, or
ON
to
OFF
.
Transmitter (Key FOB) Code learning:
The Key FOBs must be learned by the module before they will function.
Passive Arming:
If Passive Arming is set to
ENABLE
, the system will automatically arm itself (without locking) 30
seconds after the ignition is turned
OFF
and a door is opened and then all doors are closed.
Passive Locking
: If Passive Locking is set to
ENABLE
, the system will automatically lock itself (without arming)
30 seconds after the ignition is turned
OFF
if a door is opened, and then all doors are closed. If Passive Arming
AND Passive Locking are set to
ENABLE
, the system will automatically arm and lock the doors 30 seconds after
the ignition is turned
OFF
and a door is opened and then all doors are closed.
Note:
This function could result in
the keys/FOB being locked in the vehicle. Use caution when selecting this function.
Locking Time:
When pressing
or
the electrical pulse sent to the door locking/unlocking mechanism can
be set at either 0.4 seconds or 4 seconds. Most cars will function properly when this option is set to the factory
default of 0.4 seconds.
Ignition Key door Locking/ Unlocking:
When this option is set to
ENABLE
the doors will automatically unlock
when the ignition key is turned off and the doors will lock when the foot brake is depressed. This function will not
activate if a door is open when the ignition key is cycled
OFF/ON
.
Active Arm & Lock:
If this option is set to
ENABLE
, the system will automatically rearm and relock itself within 30
seconds after the system is
disarmed
by pressing
, if the door is not opened or the ignition key is not turned
ON
.
1.3
FUNCTION OPTIONS
