ART-U
TEChnICAL MAnUAL
6
2 MAIN COMPONENTS
2.1 CABINET
The elegant front panel consists of two sheets of aluminium
with a polyethylene core and possibly a polyester-based surface
coating. It is a light but very resistant material, created for cov-
ering façades in the building sector. The side panels are made of
UV-stabilized ABS to maintain the colour over time.
The polyethylene core acts as a flexible filler and thermal in-
sulation while the aluminium provides structural strength and
aesthetics.
It can be customized in different chromatic variations on request:
ART-U Grey:
Ū Side panels in ABS colour RAL 9005;
Ū Front grill supplied with black stainless steel filter;
Ū Upper grille colour black consisting of adjustable fins in ano-
dized aluminium and ABS supports.
Ū Front panel consisting of brushed natural aluminium sheets;
ART-U White:
Ū Side panels in ABS Colour RAL 9010;
Ū Front grille supplied with stainless steel filter;
Ū Upper grille consisting of adjustable fins in anodized alumin-
ium and ABS supports.
Ū Front panel consisting of RAL9010 colour sheets;
2.2 CONVEYORS
Made of high-density polystyrene. They are designed to optimise the air flow inside the hydronic indoor unit allowing optimal distri-
bution of the air flow in the coil and low noise in every operating mode.
2.3
UPPER GRILLE
Consisting of adjustable fins made of anodised aluminium, avail-
able in the version for on-board or wall-mounted control. The
ABS combs support the grilles and prevent them from being
bent, thus always guaranteeing the user’s safety.
Wall-mounted control unit version has a continuous upper grille.
In the version for on-board control, the grill has two side doors
to allow access to the control.
2.4
FRONT GRILLE
Stabilizes the operation of the tangential fan unit and is
equipped with a stainless steel filter.
2.5
HEAT EXCHANGER
With high efficiency turbocoil-type heat exchanger, and made
with copper tubing and aluminium fins, it is equipped with brass
manifolds and a vent valve.
The hydrophilic treatment is applied to the fins as a standard
treatment, to increase their efficiency during cooling.
Water connections on the left available on standard version. Wa-
ter connections on the right available on request.
