ENG - 16
DESCRIPTION Of ThE CONTROLS
P1. Glass surface
P2. Display
INSTRUCTIONS fOR USE
Power Supply
Lithium batteries are included ( CR2032 ). Please remove the insulation sheet from the battery
contacts before using. Replace the batteries when the low battery indicator shows.
To replace battery
Install:
Open battery case cover on the back of scale.
Install new battery by putting one side of the battery beneath the contact and then pressing
down the other side.
Removal:
Please battery case cover on the back of scale, then take the batteries carefully out of the
battery compartment. Please push the metal sheet outwards by your finger nails or a sharp
instrument.
The battery will pop up. Do not bend the contacts back while you do this, or they may break.
OPERATION
Put the scale on a hard and flat surface avoid carpet or soft surface).
Gently step on the scale, then the scale will be automatically turned on.
Stand evenly on the scale without moving and wait until your weight shown on display is
stable and locked.
Note:
This initialisation process must be repeated if the scale is moved. At all other times step straight
on the scale.
1)
2)
1)
2)
1)
2)
3)
Summary of Contents for HKB80032
Page 23: ...Pozn mky Notatka Notes...
Page 24: ......
