ENG - 1
ENG
AUTOMATIC SwITCh Off
When you step off the scale, it will automatically switch off. Auto shut-off occurs if display shows
„0.0“ or shows the same weight reading for approximate 10 seconds.
TO CONVERT wEIghT UNIT
Find unit switch under the battery case cover on the back of scale. Press the unit switch to con
-
vert scale unit between kg - lb - st.
Troubleshooting
Error and other LCD message
LCD may show occasionally error message. Simply turn off the unit for a brief moment, or
remove and re-install battery as a total re-set. Then turn on again to resume operation.
If, when you tap the scale to activate it, there is no display at all
or „LO“ is displayed- try two new batteries.
Scale overload.
Please step off to avoid damage.
Troubleshooting guide
Check the rights position of battery and the polarity.
When warning indicator shows „Lo“ replace the battery.
Check whether the scale is on a flat, level floor and not touching against a wall.
Ensure whether you do not step on the scale until the display shows „0.0kg“.
CLEANINg AND MAINTENANCE
Use a dry, soft fabric to clean the device. Or a lightly damp soft fabric with mild detergent to
wipe clean the device. Do not use strong chemical solution such as alcohol, benzene for cle
-
aning.
It could be slippery when the unit platform surface is wet, or semi-damp. Ensure the
weighing platform surface is dry before using for safety reason.
•
•
•
•
1)
2)
Summary of Contents for HKB80032
Page 23: ...Pozn mky Notatka Notes...
Page 24: ......
