25
01.02.2021
Cod. 80007060a - GB
8. Dixell XR77CX control panel
8.1 Description
_______________________________________________
The following instructions refer to a refrigerated cabinet with built
-
in condensing unit and DIXELL mod. XR77CX elec-
tronic controller.
This microprocessor based controller is equipped with an LED display designed for the management of refrigerating
units, display cabinets and showcases. The LED display contains 3 digits and a decimal point for reading both temper-
atures and parameter codes easily. The display contains a set of luminous icons that intuitively represent the status of
the unit. The controller is equipped with a 6
-
button keypad which activates/deactivates the main functions and stores/
modifies the working parameters.
8.2 Switch the unit on and off
To switch on the refrigerated cabinet and enable its functions, turn on the main magnetothermal switch from the con-
trol panel. When the unit is on, the display will show all icons and the 3
-
digit panel for few seconds. To switch off the
unit, move the lever to “OFF”.
Attention
: In some models, the compressor starts a few minutes after the unit is switched on.
8.3 Normal conditions of operation
________________________________
When the refrigerated cabinet is switched on, the controller will automatically manage the functioning of the condens-
ing unit to reach and keep the SET
-
POINT temperature. The set
-
point temperature is set at the factory as an average
value but it might be necessary to change this value to make the temperature more suitable to displayed products
(please refer to the information given in the product label). For the modification of the set point, refer to the following
chapter of this manual.
