Galil Visual-ICE MRI, User Manual

Page: 85 / 122

Visual-ICE
™
MRI Cryoablation System
10-5
Instruction Photo
4. While holding your hand under the fuse holder,
carefully slide the fuse holder out of the power inlet.
NOTE: There are four fuses in the fuse holder.
5. Catch the fuse holder and fuses as the fuse holder
is removed from the power inlet. The two fuses that
remain in the fuse holder are the fuses that are part
of the system circuit.
6. Replace the fuses in the fuse holder with the two
loose fuses. NOTE: Use only Galil Medical specified
fuses in the Visual-ICE MRI Console.
7. Snap the fuse holder back into the power inlet.
Replace the retention clip, plug in the power cord,
and tighten the thumb screw on the retention clip.
8. Call Galil Medical Customer Service to schedule
a service call to determine the cause of the blown
fuses, to determine if service is required and to
provide replacement fuses.