Galil Visual-ICE MRI, User Manual

Page: 67 / 122

Visual-ICE
™
MRI Cryoablation System
6-1
6 ADVANCED CONTROLS
6.1 Advanced Channel Controls
Advanced Channel Controls for each channel provide options to change the needle type for the
selected channel, link two channels together, and program multiple freeze-thaw cycles.
6.1.1 Select Needle Type Control
1. To change the needle type for a channel, press and hold the Channel button to enter Advanced
Channel Controls for that channel.
2. Select the proper needle type from the drop-down menu (Screen 6-1).
3. Press the
OK button.
Screen 6-1. Select Needle Type
6.1.2 Link Channels Control
1. Press and hold the Channel button to enter
Advanced Channel Controls
for that channel.
2. Press the Link button to link two channels together for simultaneous operation. When two
channels are linked, the Channel button shows both channels (Screen 6-2).
NOTE:
This function is not available on the channel labeled
ALL
. You can only link channels that
are on the same horizontal plane on the Needle Interface (e.g., 1 and 2, 3 and 4, 5 and 6).