Gale 30 Series, Owner'S Manual

Page: 10 / 16

Loudspeakers are significantly affected by both location within a room
and the surroundings. It is only possible therefore to offer general
advice. Please use this as a basis for experimentation. What sounds
right to you is right. Listen in particular for the depth and stability of
stereo images and the precision of bass lines and seamless integration
of the sound. If your amplifier is fitted with tone controls bypass them
or set them flat before adjusting the position of the speaker in the
room.
Firstly, follow the recommendations for stand height for stand
mounting loudspeakers. Floor standing models will get the tweeter up
to the right height by their design. The tweeter should be in your sight
line.
Ideally position the speakers in a triangular pattern with the listening
position at the apex. Beware, if the speakers are placed too far apart
in larger rooms this can create a 'hole in the middle' effect.
If possible, keep the speakers away from room corners and away from
side walls. The closer a speaker is to a wall the more bass it will reflect
back at the listener, twice as much again in a corner. Close to wall
positioning is recommended but the correct sound balance may be
found by moving the speakers out into the room.
Angling the speaker cabinets inwards can help firm up the stereo
image if the speakers are some distance apart. Imagine lines drawn
out from the speakers, and angle them so the lines would cross a
couple of feet in front of the listening position.
Using speakers too close to fabric, soft furnishings or drapes can
muffle the sound and degrade the stereo image. Conversely,
placement too close to reflective surfaces may create a harsher
balance.
EXPERIMENT !!
REMEMBER - IF IT SOUNDS RIGHT TO YOU, IT IS RIGHT !!
Positioning your Hi-Fi Loudspeakers
10
AP12309/1 Gale 30 Series Owners' Manual (page 10)
Print Pantone Cool Grey 9C