Gal Pro
Instruction 1.0
Filter Flush System
Subject
Example
Explanation
Status
Active
Possible options:
N. Activ - Flush is not defined
Active - Filter flush is defined properly.
Flush - The system is currently flushing.
Fault - The flushing system is in fault. The fault is "continuous
flushed".
Curr. Flush Unit
1
The number of the filter currently flushing.
Start Condition
No
If a PD switch is connected it shows the status of the contact:
No - The contact is open and flushing is not required.
Yes - The contact is closed and flushing is required.
Fin. Pipe Delay
Pipe Delay-Min.
0
5
Fin. pipe delay means that the fill pipe delay has finished. Pipe
Delay-Min shows the time remaining for the fill delay.
Cycles Today
5
The number of times that the system has flushed today.
Wtr.Accum.m3
27
The amount of water flowed since the beginning of the last flush.
Displayed if irrigation is defined by quantity.
Tim.Accum.Hr.
3:45
The time since the last flush.
Continuous
Flush Fault
No
If the number of continuous flushes exceeds the definition, an
alarm is shown here.
7. Information and Programming Menus
Services
System Setup
Sequence Setup
Filter Flush
Fertilization
Sequence Timing
Valve • Water & Fert.
Water Counter
Diaries
Alarms
Valve Info
Sequence Info
Manual Overriding
Sequence Status
Valve Status
System Status
Summary of Contents for Gal Pro DC
Page 1: ...GalPro AC DC Operating Manual...
Page 2: ......
