6
Assemble the Control Box
1. ASSEMBLE THE CONTROL BOX
1.1 Take out control box inside of the
packing carton, then place the control
box on top of the machine in the right
position. (figure 1.1)
1.2 Fasten the control box onto the
machine with 4 screws tightly. (figure
1.2)
1.3 Connect 5 phase aviation plug and 2
phase aviation plugs, then fasten
tightly. (figure 1.3)
ATTNTION: the aviation plug must be
connected tightly. (figure 1.4)
CAUTION
A sway connector will cause burning.
Ensure the connector is secure.
Summary of Contents for GS-105HS
Page 4: ...4...
Page 5: ...5 Control Panel Guide Operation Instructions...
Page 16: ...16 Electrical Schematic...
