7.3 Charging The EVO True Wireless Fitness Transmitter
NOTICE: Prior to use, it is necessary to fully charge your EVO transmitter. Initial charge
from a depleted state may take up to four (4) hours or more.
NOTICE: The supplied charger is designed specifically for use with the EVO True Wireless
system. Use of any other charger may cause system damage and will void your
warranty.
●
Open the charger cover and insert the charging connector into the EVO as illustrated below. Only
the supplied wall charger should be used.
●
Insert the charging cable into the
charging adapter as illustrated at
right. Insert the cable fully.
●
Connect the charging transformer to AC power (that's 'manual talk' for 'plug it in to the wall').
●
Note that the EVO transmitter should be powered OFF while charging.
●
GREEN LED indicates battery charging.
●
GREEN LED will turn off when battery is charged.
IMPORTANT:
Close cover after charging!
Failure to close the cover may affect water resistance and void your warranty. The charging
connector of your EVO has internal coating of silicone to further protect against corrosion.
Carefully re-applying a
small
amount of the supplied silicone on a monthly basis will keep the
connections protected. Part number SP-SG10, if you need more.
Similarly, after selecting your operating channel, be certain that the channel selector cover is closed
and secured. No silicone is needed here.
8
Summary of Contents for Special Projects EVO Scan16
Page 1: ......
