Warning:
Please get rid of the gasket of the door before the
disposal. The disposed apparatus should be handled by
professional staff, as it may be harmful to the environment.
2. Cleansers such as soap powder, abrasive cleaning powder, alkali
cleansers, chemical cloth, thinner, alcohol, acid petroleum
product and hot water should not be used to clean the refrigerator
as they may damage the painted cover and plastics.
3. Smear can age the interior plastic component, so wipe it as soon
as possible.
4. Please check the points below after maintenance:
(1) Is there any damage or loss of the electronic wire ?
(2) Can the plug be put in the socket reliably and smoothly?
(3)Is the plug heating unconventionally?
7.Heavy frost occurs on the rear of the appliance
Putting humid or hot food into the appliance may cause this problem. Or
it may be caused by the heavy environment moisture.
1.The refrigerator does not work.
It may not be connected to the power supply(plug, power cut or fuse);
Voltage is too low.
2.The refrigerator does not work efficiently as expected.
It may be caused by heavy frost, or by warm temperature setting,or by
frequently door operating.
3.It makes unusual noise.
It may be caused by an imbalance or loose ground locating the appliance,
or by resonation between the appliance and other ambient objects.
4.The compressor keeps working for a long period.
The environment temperature may be too high. The doors may be opened
frequently or even they are left open. The temperature control knob
setting in (4-6) state may increase the working time of compressor
5.Disgusting odour happens.
Food with strong odour should be packed tightly before being put inside the
appliance. Please check whether there is any deteriorated item or
whether the liners are left dirty for a long time.
6.Water leaks from the bottom of the refrigerator.
The drain tube is jammed. Please use a proper tool to solve it.
4. It is better not place object on the top of appliance which is magnetic,
heavy, or be filled with water. Electronic components may not work steadily
if water gets inside. Do not store object which is costly or impressible
to temperature and , e.g. serum, bacterin and so on.
1.The refrigerator should be located in a completely flat surface , Leave 5~10
cm between each side of the appliance and the wall,
and leave 30 cm between the top of the appliance and
the ceiling .
2.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity may
cause stain.
3.
Pulled out the bottom panel before installation.
4.The appliance can be adjusted by rolling its two
legs in front the bottom when it is unstable. Rolling
in clockwise can rise up the machine.
5.The location should be firm and flat. An un-securely
position may cause noise and libration
(a)The noise may be increased if the
floor is not firm.
(b) Put a sheet under the appliance for solving the heat
emission if you need to locate it onto a carpet.
6.Make sure the adjustable legs are clung to the floor, and set the appliance
slope backward slightly for keeping the doors closed tightly.
Warning:
Do not use any electronic equipment inside the appliance.
PLACEMENT OF FOOD
1.There should always be some space between
items inside for air circulation.
2.Food should be kept in sealed package to avoid
becoming dry or with odour.
3.Hot food should be cooled down before placing
into the appliance. Otherwise, interior
temperature and electronic consumption
will increase.
4.Reduce the frequency of door opening can
efficiently low down the electronic consumption.
6
3
TROUBLE SHOOTING TIPS
INSTRUCTIONS OF INSTALLATION
INSTRUCTIONS OF OPERATING
